Eaton easyE Remote Touch Display, Standard, 24 V DC, 4.3 inch, TFTcolor, resistive, 480x272 px, Ethernet
| Product Name |
Eaton EASY Touch panel
|
| Catalog Number |
199740
|
| EAN |
7640130098527
|
| Product Length/Depth |
136 mm
|
| Product Height |
38 mm
|
| Product Width |
101 mm
|
| Product Weight |
0.206 kg
|
| Compliances |
CE Marked
RoHS conform DNV Eaton supports the product until its end of life |
| Certifications |
UL File No.: E205091
UL 61010-2-201 |
| Catalog Notes |
No PLC function possible
|
| Model Code |
EASY-RTD-DC-43-03B1-00
|
| Enclosure material |
Insulated material
|
| Fitted with: |
Alpha numeric keyboard
Color display 1 x Ethernet 100base-TX/10base-T (built-in interface) 1 x USB host (built-in interface) |
| Degree of protection |
IP20, rear (according to EN 60529-1)
|
| Display type |
TFT
Standard front with standard membrane (fully enclosed) |
| Number of colors of the display |
64000
|
| Product category |
Touch display for easyE4
|
| Screen size (diagonal) |
4.3 in
|
| Software |
Standard: pre-installed application software which mirrors the display and keypad of an easyE4 base unit. No programming required.
|
| Touch technology |
Resistive touch
Touch sensor (glass with foil), Resistive touch protective screen |
| Used with |
EASY-E4
|
| Voltage type |
DC
|
| Shock resistance |
15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts
|
| Vibration resistance |
According to IEC/EN 60068-2-6
|
| Ambient storage temperature - min |
-20 °C
|
| Ambient storage temperature - max |
60 °C
|
| Environmental conditions |
Condensation: prevent with appropriate measures
|
| Voltage dips |
5 ms from undervoltage (19.2 V DC)
≤ 10 ms from rated voltage (24 V DC) |
| Permissible voltage |
18.0 - 31.2 V DC, absolute with ripple
35 V DC (for a duration of < 100 ms) 18 - 31.2 V DC, battery powered (rated operating voltage -25 %/+30 %) 19.2 - 30 V DC, effective (rated operating voltage -20 %/+25 %) |
| Power consumption |
7.2 W
4.7 W |
| Rated operational voltage |
24 V DC (power-supply - safety extra low voltage)
|
| Supply voltage at DC - min |
19.2 VDC
|
| Supply voltage at DC - max |
30 VDC
|
| Interfaces |
Ethernet (100Base-TX/10Base-T)
USB 2.0 host (not galvanically isolated) |
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Static heat dissipation, non-current-dependent Pvs |
7.2 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Odeslat e-mail
Technické údaje produktu
