Download document () of 20
Send email
Download
You have exceeded the download limit
120V 350VA 210W Standby UPS - 6 NEMA 5-15R Outlets, 50/60 Hz, 5-15P Plug, Desktop/Wall Mount
Dependable Battery Backup for PCs and Retail Point-of-Sale Applications
This standby UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise for computing, networking and point-of-sale equipment in retail, kiosks, food service, and light industrial environments. It’s easy to set up in minutes. Just plug the UPS into a properly grounded wall outlet, connect equipment to the UPS outlets and press the power button.
Allows Time to Back Up Critical Files During a Blackout
During short blackouts and brownouts, the UPS switches to battery power to keep connected equipment running. This allows you enough time to save data and complete a safe shutdown in case of a longer outage. Incoming utility power keeps the user-replaceable valve-regulated lead acid (VRLA) battery fully charged, so backup power is always available.
Filtering EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Its outlets also feature surge suppression to protect your connected devices from the harmful effects of voltage spikes and power surges.
Easy Preventative Maintenance and Initial Troubleshooting
The self-test capability and user-replaceable internal battery can extend the life of the UPS and minimize disruption to operations. A resettable circuit breaker helps prevent dangerous system overloads.
Audible Alarm and Diagnostic LEDs Keep You Informed 24/7
An audible alarm alerts you to critical events like low battery or overload conditions. LEDs indicate power status, battery mode and fault alerts.
Compact Housing Compatible with Easy Desktop or Wall-Mount Installation
The space-saving ABS housing fits on a desktop, shelf or anywhere else convenient to your workstation or home theater. Keyhole mounting tabs on the rear allow easy wall-mount installation. The five-foot power cord with NEMA 5-15P plug connects to any compatible AC outlet.
| Product Name |
Eaton Tripp Lite series UPS
|
| Catalog Number |
BC350
|
| UPC |
037332210937
|
| Product Length/Depth |
10.9 in
|
| Product Height |
7 in
|
| Product Width |
5.5 in
|
| Product Weight |
4.5 lb
|
| Compliances |
RoHS
FCC Class A |
| Certifications |
CSA certified
UL 1778 NOM |
| Global Catalog |
BC350
|
| Product Type |
UPS
|
| Topology |
Standby
|
| Rack size |
0U
|
| VA rating |
350 VA
|
| Package contents |
|
| Input nominal voltage |
120V AC
|
| Nominal frequency |
50/60 Hz
|
| Input frequency range |
50/60 Hz
|
| Receptacle |
5-15R
|
| Output nominal voltage |
110 / 120V
|
| Electric current - max |
|
| Battery replacement |
IMPORTANT BATTERY REPLACEMENT INFORMATION > If your BC350 UPS has no battery access door, please contact a local electronics repair technician to source and install a matching replacement battery; If your BC350 UPS does have a battery replacement door and the original battery inside has a rating of 12V 2.8AH, please contact Tripp Lite for assistance
|
| Battery type |
Valve Regulated Lead Acid (VRLA)
|
| Runtime at half load |
7 min
|
| Relative humidity |
Up to 90% non-condensing
|
| Input Plug Type |
NEMA 5-15P
|
| Output Receptacles |
5-15R
|
| Nominal Output Voltage |
110V
115V 120V |
| Network Management Cards Details |
Network management not supported
|
| Phase (input) |
Single-phase
|
| Runtime at full load |
2 min. (210W)
|
| Communication interface |
None
|
| Battery Access |
Includes bottom panel battery access door
|
| Dc Voltage |
12
|
| Operating Temperature Range |
32° to 104°F (0° to 40°C)
|
| Optional Mounting Accessory Notes |
Bottom panel keyhole mounting tabs enable wall-mount installation
|
| High Voltage Transfer to Battery Power |
145
|
| Low Voltage Transfer to Battery Power |
95
|
| Application |
|
| Switch configuration |
Power switch enables UPS on / off control
|
| Hot Swap PDU Options |
PDUB15 (2U / 8 5-15R outlets)
|
| AC suppression joule rating |
316
|
| Housing material |
ABS
|
| Output AC waveform (AC mode) |
Sine wave
|
| Output AC waveform (battery mode) |
PWM sine wave
|
| Output Capacity (kVA) |
0.35
|
| Output Capacity (Watts) |
210
|
| Primary UPS Depth (mm) |
185
|
| Primary UPS Height (mm) |
105
|
| Primary UPS Width (mm) |
110
|
| AC Suppression Response Time |
Instantaneous
|
| Audible Alarms |
Alarm reports low-battery, fault, overload and replace battery conditions; Alarm remains silent during battery mode operation until low-battery status occurs; See manual for additional alarm notifications
|
| Battery Start Capability |
Cold-start operation supported
|
| Battery Replacement Description |
Replaceable internal battery (see manual)
|
| LED Indicators |
Single green LED reports Line Power Mode (ON continuous), Battery Backup mode (flashes ON every 10 seconds); See manual for additional LED notifications
|
| Frequency Rating Details |
Auto-sensing
|
| Output Voltage Regulation (Line Mode) |
120V ±20%
|
| Output Voltage Regulation(Battery Mode) |
120V ±10%
|
| Recommended Electrical Service |
15A 120V
|
| Storage Temperature |
5° to 122°F (-15° to 45°C)
|
| Maximum Input Amps |
5
|
| UPS Input Cord Length (m) |
1.5
|
| UPS Power Module Dimensions |
4.13 x 4.33 x 7.28
|
| Power Mode Transfer Time |
6 milliseconds typical (10 milliseconds max)
|
| Total Outlets |
6
|
| Output Capacity (VA) |
350
|
| Connected Equipment Insurance |
$100,000 Ultimate Lifetime Insurance |
| EMI AC Noise Suppression |
EMI / RFI AC Noise Suppression
|
| UPS Input Connection Type |
5-15P
|
| Green Energy-Saving Features |
Greater than 95% efficiency - GREEN UPS
|
| UPS Output Receptacles |
3 UPS outlets, 3 surge-only outlets
|
| High Availability UPS Features |
Surge/noise protection
|
| Nominal Input Voltage Supported |
120V AC
|
Support from Eaton
Product specifications
